Assigning IP addresses and setting up DHCP/TFTP servers
258
Innominate Security Technologies
14.2
Installing the DHCP and TFTP server
Installing a second DHCP server in a network could affect the configuration of the entire
network.
Under Windows
Install the program provided in the download area at
•
If the Windows computer is connected to a network, disconnect it from the network.
•
Copy the firmware to an empty folder on the Windows computer.
•
Start the TFTPD32.EXE program.
The host IP to be specified is: 192.168.10.1. It must also be used as the address for the net-
work card.
•
Click on Browse to switch to the folder where the mGuard image files are saved: in-
stall.p7s, jffs2.img.p7s
•
If a major release upgrade of the firmware is carried out by flashing, the license file pur-
chased for the upgrade must also be stored here under the name licence.lic.
Make sure that this is the correct license file for the device (under "Management >> Up-
date" on the web interface).
Figure 14-4
Entering the host IP
www.innominate.com
.
I15007_en_02