Operating Elements And Leds - Innominate mGuard Reference Manual

mGuard blade
Table 10-2 mGuard blade
LED State
WAN, LAN Red
WAN Red
WAN, LAN Green
WAN Red/gree
n
LAN Green
182
Innominate Security Technologies
10.1

Operating elements and LEDs

Serial
WAN red
WAN green
LAN red
LAN green
Reset button
Figure 10-2 Operating elements and LEDs on the mGuard blade
Meaning
Flashing Boot process. When the computer is started or restarted.
Flashing System error. Restart the device.
• Press the Reset button (for 1.5 seconds).
If the error is still present, start the recovery procedure (see "Performing a re-
covery procedure" on page 193) or contact your dealer.
On or flash- Ethernet status. Indicates the status of the LAN or WAN interface. As soon as
ing the device is connected, a continuous light indicates that there is a connection
to the network partner.
When data packets are transmitted, the LED goes out briefly.
Various LED Recovery mode. After pressing the Reset button.
light codes
See "Restart, recovery procedure, and flashing the firmware" on page 192
I15007_en_02