Innominate mGuard Reference Manual page 140

mGuard centerport²
140
Innominate Security Technologies
Start rescue procedure from SD Card
Requirement: The firmware of the mGuard has been previously copied to the SD card:
/Firmware/install.x86_64.p7s
/Firmware/firmware.img.x86_64.p7s
Effect: The mGuard downloads all necessary files from the inserted SD card. With this
in mind, while the boot menu is displayed at the latest and before applying this selec-
tion, insert the SD card with the stored firmware into the mGuard. (For security reasons,
the mGuard centerport² does not boot from an SD card).
– Once the rescue procedure is complete, a corresponding message appears on the
monitor. Follow any further on-screen instructions.
The mGuard is in the delivery state. You can now configure it again (see "Establishing a
local configuration connection" on page 133):
Burning the mGuard firmware to CD/DVD-ROM
The firmware for the mGuard can be burnt to CD/DVD. A zip file is available for download
from the download page of www.innominate.com.
Burn the content of this zip archive as a data CD/DVD. The following files must be located
in the following folders/under the following path names on the CD/DVD:
– /Firmware/install.x86_64.p7s
– /Firmware/firmware.img.x86_64.p7s
I15007_en_02