Technical Data - Innominate mGuard Reference Manual

Hardware properties
Platform
Network interfaces
Other interfaces
Drives
Redundancy options
Power supply
Power consumption
Humidity range
Degree of protection
Temperature range
Dimensions (H x W x D)
Weight
Firmware and power values
Firmware compatibility
Data throughput (router | firewall)
Hardware-based encryption
Encrypted VPN throughput (AES-256)
Management support
Diagnostics
Other
Conformance
I15007_en_02
8.8

Technical data

Intel network processor
with 533 MHz clocking
4 LAN ports, unmanaged switches | 1 WAN port
Ethernet IEEE 802.3 10/100 Base TX |
RJ45 | full duplex | auto MDIX
Serial RS-232, D-SUB 9 connector
–
Depending on the firmware used
External power supply unit 5 V/3 A, DC | 110 V ... 230 V, AC
4.5 W, typical
5% ... 95% during operation, non-condensing
IP20
0°C ... +40°C (operation)
-20°C ... +70°C (storage)
30 x 239 x 156 mm
1300 g
mGuard v5.0 or later: Innominate recommends firmware version 6.x or 7.x to
be used with the latest patch releases;
For the scope of functions, please refer to the relevant firmware data sheet.
99 Mbps bidirectional | 99 Mbps bidirectional
DES | 3DES | AES-128/192/256
70 Mbps bidirectional
Web GUI (HTTPS) | command line interface (SSH) | SNMP v1/2/3 | central
device management software
7 LEDs (Power, Status, WAN, LAN 1 – 4) | log file | remote syslog
CE | FCC
mGuard delta
Innominate Security Technologies
155