Modify Synchronization Switch Outgoing - Alcatel-Lucent 1850 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-76 Modify synchronization switch outgoing
The Synchronization Switch Outgoing tab displays the Modify Synchronization
Switch Outgoing panel that contains the following parameters:
Switch Command - Specifies the switch command that is requested by the user. The
•
values are LOCKOUT, FRCD, and MAN
Shelf Access Identifier - This is used to change the content of Switch To Reference
•
parameter according to the selected shelf access identifier
Switch To Reference - Specifies the access identifier of the synchronization facility
•
The Operate link sends the "OPR-SYNCNSW-OUT" TL1 command to the agent
Release
The Release option displays the following as shown in
Figure 3-77 Modify synchronization switch outgoing
The Synchronization Switch Outgoing tab displays the Modify Synchronization
Switch Outgoing panel that contains the following parameters:
Shelf Access Identifier - This is used to change the content of the Access Identifier
•
parameter according to the selected shelf access identifier
Access Identifier - Specifies the access identifier of the synchronization facility
•
The Release link sends the "RLS-SYNCNSW-OUT" TL1 command to the agent
............................................................................................................................................................................................................................................................
3 - 80
Synchronization menu
Figure 3-77.
Issue 1 February 2009
8DG08763KAAA