1
DISASSEMBLY (AUXILIARY PARTS)
DISASSEMBLY
1. Remove in the sequence shown in the figure, for the specially marked parts referring to disassem
bly note.
2. Code all identical parts (such as pistons, piston rings, connecting rods, and valve springs) so that
they can be reinstalled in the cylinder from which they were removed.
3. Clean the parts with steam, blow off any remaining water with compressed air.
Note
Care should be taken during the disassembly of any part or system to study its order of
assembly. Any deformation, wear, or damage should also be noted.
AUXILIARY PARTS
1 -3 2
86U01X-061