Making Copies With Paper Loaded In The Cassette - Canon PC880 Operator's Manual

Basic Copying
Making Copies with Paper Loaded in the
Cassette
This section describes the procedure for making copies with paper loaded in the cassette. To copy onto
postcards or transparencies, etc., or other types of copy stock, use the multi-stack bypass (PC880) or single-
sheet bypass (PC860). (See p. 29.)
1
Press the power switch ON.
MEMO:
"1" appears in the Copy quantity/Copy ratio display.
...............................
2
Place your original on the platen glass. The side that you want to
copy must face downward. Align the original between the
appropriate paper size marks.
CAUTION:
Close the platen glass cover gently to avoid catching your hand, as this
may result in personal injury.
MEMO:
After placing the original, lower the platen glass cover. Do not copy
...............................
with the platen glass cover left open; doing so will result in excessive
toner consumption.
Positioning Originals
Use the guide plate on the left side of the platen glass to position
originals.
If your original conforms to a standard paper size (e.g., A4 or
A5), align the original between the appropriate paper size
marks on the guide plate.
If you do not know the size of your original, or if your original
does not match any of the paper size marks, align the centre of
your original with the
The illustration to the right shows how to place an A4-size original.
mark at the centre of the guide plate.
Paper size marks
LTR/FLS/LGL
A4
B5
A5
STMT
STMT
A5
B5
A4
LTR/FLS/LGL
27