Making Overlay Copies - Canon GP215 Service Manual

3. OPERATIONS AND TIMING
H. Making Overlay Copies
1. Outline
Figure 3-628-1 shows the paper path used to make overlay copies.
Copy paper that has moved through the fixing assembly is sent to the lower feeding assembly by the
movement of the paper deflecting plate*. In the lower feeding assembly, the set-back roller puts the incom-
ing sheet in a staggered stack and waits for the next sheet.
When picked up from this stack (re-pick up), copy paper is discharged by the movement of the paper
deflecting plate 1**.
* The paper deflecting plate 1 solenoid (SL5) turns ON to rotate the paper deflecting plate 1 counter-
clockwise.
** The paper deflecting plate 1 solenoid (SL5) turns OFF so that the paper deflecting plate 1 is restrained
by the force of the spring.
Paper deflecting plate 1
Delivery roller
Details of the movement of
the paper deflecting plate
< Pulling into the lower feeding assembly
for reversed delivery when copying on the
1st side of an overlay copy >
3–104
COPYRIGHT © 1996 CANON INC.
Fixing assembly
Set-back roller
*1
Flow of copy paper
M8
SL5
ON
Figure 3-628-1
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Registration roller
Vertical path roller 1
Re-pick up roller
*2
Flow of copy paper
M8
SL5
Force of
spring
OFF
< Copying on the 1st side of a two-sided
copy when delivering the last copy >