Indicators - Datalogic DS2200 Installation Manua

DS2200
•
IP65 protection class of the enclosure; the reader is therefore suitable for
industrial environments where high protection against harsh external
conditions is required.
The laser beam output window is on the side of the scanner (Figure A,
A security system allows the laser to activate only once the motor has
reached the correct rotational speed; consequently, the laser beam is
generated after a slight delay from the power on of the scanner.

1.2.1 Indicators

The four LEDs on the scanner indicate the following:
POWER ON
GOOD READ (red), is used to signal the possibility of a successful barcode
EXT TRIG
TX DATA
The screw holes on the body of the reader are for mechanical fixture
(Figure A, ).
8
2 - General Features
(red), indicates the reader is connected to the power supply.
(Figure A, ).
3
reading. (Figure A,
(yellow), indicates external trigger activity. Refer to par. 2.3.4.
(Figure A, ).
5
(green), when
(Figure A, ).
6
).
4
blinking, indicates
DATALOGIC
2
data transmission.
).