Indicators - Datalogic Gryphon GPS4421 Quick Reference Manual

Indicators

Indicators
The reader's beeper sounds and its LED illuminates to indicate vari-
ous functions or errors on the reader. An optional "Green Spot" also
performs useful functions. The following tables list these indications.
One exception to the behaviors listed in the tables is that the reader's
functions are programmable, and so may or may not be turned on.
For example, certain indications such as the power-up beep can be
disabled using programming bar code labels.
Indicator
Power-up Beep
Good Read Beep
ROM Failure
Limited Scan-
ning Label Read
18
Description
The reader is in the
process of power-
ing-up.
A label has been
successfully
scanned by the
reader.
There is an error in
the reader' s soft-
ware/programming
Indicates that a
host connection is
not established.
LED
LED behavior for
this indication is
configurable via
the feature "Good
Read: When to
Indicate"
(see the PRG for
information.)
Flashes
N/A
Beeper
Reader beeps four
times at highest
frequency and vol-
ume upon
power-up.
The reader will
beep once at cur-
rent frequency, vol-
ume,
mono/bi-tonal
setting and dura-
tion upon a suc-
cessful label scan.
Reader sounds one
error beep at high-
est volume.
Reader ' c hirps' six
times at the high-
est frequency and
current volume.
Gryphon™ GPS4400