Deleting Firmware Distribution Schedule - Canon imageRUNNER ADVANCE C350 series Service Manual

7. When the device is restarted, confirm the version of the firmware.
1). Press [Check Counter Key] button on the control panel.
2). Press [Check Device Configuration] button.
3). Confirm if the updated firmware version corresponds to [Controller Version].
Now the firmware is successfully updated in the method of "Manual Download and Update".
CAUTION:
Firmware update will not be triggered when any of the following jobs remains in the
queue.
-Print
-Scan
-Fax (except I-FAX; this function is enabled for I-FAX only during Print/Scan operation)
See the section of "Wait for EOJ (end of job) Function" under "Limitations and
Cautions", "Updater" of Chapter 2 "Technical Information" of this manual for more
detailed information.
6
Troubleshooting > Version Upgrade > Version Upgrade via CDS > Deleting Firmware Distribution Schedule
6 Troubleshooting > Version Upgrade > Version Upgrade via CDS > Deleting Firmware Distribution Schedule

■ Deleting Firmware Distribution Schedule

This section describes how to delete firmware distribution schedule set by Updater.
1. Start [Service Mode] at Level 1.
2. Press [Updater] button.
3. Press [Update Firmware] button.
4. Press [Delete Scheduled Delivery] button.
6-57
F-6-99
F-6-100
6-57