Canon imageRUNNER ADVANCE C350 series Service Manual page 957

COPIER> OPTION> LCNS-TR
ST-2600 Instal state dspl: IEEE2600.1 scrty func
Lv.2 Details To display installation state of security function of IEEE2600.1 when
disabling the function with license transfer.
Use case When checking whether security function of IEEE2600.1 is installed
Adj/set/operate method 1) Select ST-2600.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-2600.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-2600 Trn lcns key dspl: IEEE2600.1 scrty func
Lv.2 Details To display transfer license key to use security function of IEEE2600.1
when the function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-2600.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-2600.
Display/adj/set range 24 digits
ST-OPFNT Install state display of PCL function
Lv.2 Details To display installation state of PCL Font Set when disabling the
function with license transfer.
Use case When checking whether PCL Font Set is installed
Adj/set/operate method 1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-OPFNT.
Display/adj/set range When operation finished normally: OK!
Default value 0
Supplement/memo PCL Font Set can be installed only at installation by service
technician or at pre-installation.
When replacing the HDD, check that AndaleFont is displayed
by going through the following: Settings/Registration> Function
Settings> Printer> Output Report> PCL> Font List.
8
Service Mode > COPIER > OPTION > LCNS-TR
8 Service Mode > COPIER > OPTION > LCNS-TR
COPIER> OPTION> LCNS-TR
TR-OPFNT Trns license key dspl of PCL function
Lv.2 Details To display transfer license key to use PCL Font Set when the
function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-OPFNT.
Display/adj/set range 24 digits
Supplement/memo PCL Font Set can be installed only at installation by service
technician or at pre-installation.
When replacing the HDD, check that AndaleFont is displayed
by going through the following: Settings/Registration> Function
Settings> Printer> Output Report> PCL> Font List.
8-187
T-8-55
8-187