Canon imageRUNNER ADVANCE C350 series Service Manual page 946

COPIER> OPTION> ACC
CARD-SW Screen set when Coin Manager connected
Lv.1 Details To set coin or card that the user is urged to insert on the Control
Panel when the Coin Manager is connected.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Coin, 1: Card, 2: Coin and card, 3: Card (for customization)
Default value 0
CC-SPSW Support setting of control card I/F
Lv.2 Details To set support level for control card (CCIV/CCV) interface.
To keep processing performance of printer engine, select "1: Priority
on speed".
To correctly stop the output by the upper limit number of sheets,
select "2: Priority on upper limit number of sheets".
Use case Upon user's request (when connecting to the external counter
management system using the control card interface)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution With priority on speed, output cannot be correctly stopped by the
upper limit number of sheets.
With priority on the upper limit number of sheets, processing
performance of the printer engine is decreased depending on pickup
location.
Display/adj/set range 0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number
of sheets
Default value 0
UNIT-PRC Setting of Coin Manager currency unit
Lv.2 Details To set currency unit to be handled with Coin Manager
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 6
0: Japanese yen, 1: Euro, 2: Pound, 3: Swiss Franc. 4: Dollar, 5: No
currency unit (no fractional unit), 6: No currency unit (with fractional
unit)
Default value 0
8
Service Mode > COPIER > OPTION > ACC
8 Service Mode > COPIER > OPTION > ACC
COPIER> OPTION> ACC
MIN-PRC Set of Coin Manager minimum price
Lv.1 Details To set the minimum amount to be handled with Coin Manager.
Enter 10 when specifying 10 Japanese yen as the minimum amount
to be handled with the Coin Manager that supports Japanese yen.
In the case to specify 1 to 4 (Euro/Pound/Swiss Franc/Dollar) by
going through the following: COPIER> OPTION> ACC> UNIT-PRC,
entry is in fractional unit. Entry of 50 indicates 50 cents ($ 0.50).
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution This mode is enabled when selecting 4 for the following: COPIER>
OPTION> ACC> COIN.
Display/adj/set range 0 to 9999
Default value 10
Related service mode COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/memo As for the charging amount, it causes an error if specifying the
value that is smaller than the minimum currency unit with Settings/
Registration menu.
MAX-PRC Set of Coin Manager maximum price
Lv.1 Details To set the maximum amount to be handled with Coin Manager.
Enter 8800 when specifying 8800 Japanese yen as the maximum
amount to be handled with the Coin Manager that supports Japanese
yen.
In the case to specify 1 to 4 (Euro/Pound/Swiss Franc/Dollar) by
going through the following: COPIER> OPTION> ACC> UNIT-PRC,
entry is in fractional unit. Entry of 50 indicates 50 cents ($ 0.50).
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution This mode is enabled when selecting 4 for the following: COPIER>
OPTION> ACC> COIN.
Display/adj/set range 0 to 9999
Default value 8800
Related service mode COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/memo As for charging amount, it causes an error if specifying the value that
is larger than the maximum currency unit with Settings/Registration
menu.
8-176
8-176