Setting The Method To Login To Sms - Canon imageRUNNER ADVANCE C350 series Service Manual

2
Technical Explanation > MEAP > Setting the method to login to SMS > Outline
Note:
Only the following users may us SMS via RLS.
• For local device authentication, users with Administrator or Device Admin authority.
• In the case of server authentication, the users who belong to the group (default: Canon
Peripheral Admins) specified as the device administrator on the SSO-H Configuration
screen.
Note:
SMS Access can be gained also from Remote UI.
Access Remote UI and click on SMS shortcut shown on the lower right of the screen to
gain access to SMS.
When only the password authentication is enabled, the password authentication screen
is shown.
When only the RLS authentication is enabled, no further authentication is needed to
access SMS. This is because users have already authorized upon accessing to Remote
UI.
2 Technical Explanation > MEAP > Setting the method to login to SMS > Outline

Setting the method to login to SMS

■ Outline
The method to log into SMS can be specified by one of the following methods.
• If you want to change the password authentication settings: Use RLS authentication to
log in, and change the settings.
• If you want to change the RLS authentication settings: Use password authentication to
log in, and change the settings.
The following table shows the start/stop combinations of the two login methods.
Combination of Login Methods
Start Password Authentication
Stop Password Authentication
F-2-259
CAUTION:
If only login via RLS is programmed, login may be disabled for the following reasons.
• Authentication server is down
• Network problem, no communication with authentication server
In the event of either of these cases, try the following.
1. If local device authentication is active, try logging in with local device
authentication.
2. If only server authentication is active, launch in MEAP safe mode from the device
service mode.
After launching in MEAP safe mode, the Default Authentication will become active, and
you will be able to login to SMS with password authentication. After logging into SMS,
set the password authentication login to ON (active) and restore the device from MEAP
safe mode to normal mode. Until the problem blocking authentication is resolved, log
into SMS with password authentication.
F-2-260
Start RLS Authentication Stop RLS Authentication
Login available with either method Login available only with
Login available only with RLS Setting unavailable
Authentication
2-165
T-2-77
2-165