Password Authentication; System Application Management - Canon imageRUNNER ADVANCE C350 series Service Manual

2
Technical Explanation > MEAP > System Application Management > Password authentication
■ Login Service Uninstallation Procedure
Follow the procedure show below to uninstall login services.
In order to uninstall a login service, the service needs to be stopped ("Installed" status).
Default Authentication cannot be uninstalled even when the service is stopped.
1) Access SMS, and select [System Management] > [Enhanced System Application
Management].
2) Click the [Uninstall] of the login service you want to uninstall.
2 Technical Explanation > MEAP > System Application Management > Password authentication

System Application Management

This function manages the login services for logging in to SMS.
There are two login methods: one is "password authentication" where you enter the password
for SMS on the SMS login screen and log in, and the other is "RLS authentication" where you
do not use the SMS login screen but enter the user ID and password on the RLS (Remote
Login Service) screen for authentication.

■ Password authentication

Enter the password on the SMS login screen for authentication. Only one password can be
set for SMS.
The login procedure is shown below.
1) Access SMS from the browser of a PC on the same network as the MEAP device. The URL
is as follows.
URL: https://<IP address of MEAP device>:8443/sms/
Ex.) https://172.16.188.240:8443/sms/
Note:
F-2-253
To encrypt the password information input when logging in, SSL of the login screen
was made effective. However, it is redirected to new URL (effective SSL) even when
accessing with URL (non-SSL) before.
2) Enter the password in the password entry field, and click the [Log In]. The default password
is "MeapSmsLogin." (The password is case-sensitive.)
F-2-254
2-163
F-2-255
2-163