Canon imageRUNNER ADVANCE C350 series Service Manual page 834

COPIER> ADJUST> CCD
OFST-CL4 Adj CIS-ch4 offset: color mode, 300 dpi
Lv.1 Details To adjust the offset (black level) of the Scanner Unit on channel 4 in
color mode with 300 dpi.
This setting is not available for a 25-ppm machine.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 216
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
OFST-CL5 Adj CIS-ch5 offset: color mode, 300 dpi
Lv.1 Details To adjust the offset (black level) of the Scanner Unit on channel 5 in
color mode with 300 dpi.
This setting is not available for a 25-ppm machine.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 216
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
OFST2CL0 Adj CIS-ch0 offset: color mode, 600 dpi
Lv.1 Details To adjust the offset (black level) of the Scanner Unit on channel 0 in
color mode with 600 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 216
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
OFST2CL1 Adj CIS-ch1 offset: color mode, 600 dpi
Lv.1 Details To adjust the offset (black level) of the Scanner Unit on channel 1 in
color mode with 600 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 216
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
8
Service Mode > COPIER > ADJUST > CCD
8 Service Mode > COPIER > ADJUST > CCD
COPIER> ADJUST> CCD
OFST2CL2 Adj CIS-ch2 offset: color mode, 600 dpi
Lv.1 Details To adjust the offset (black level) of the Scanner Unit on channel 2 in
color mode with 600 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 216
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
OFST2CL3 Adj CIS-ch3 offset: color mode, 600 dpi
Lv.1 Details To adjust the offset (black level) of the Scanner Unit on channel 3 in
color mode with 600 dpi.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 216
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
OFST2CL4 Adj CIS-ch4 offset: color mode, 600 dpi
Lv.1 Details To adjust the offset (black level) of the Scanner Unit on channel 4 in
color mode with 600 dpi.
This setting is not available for a 25-ppm machine.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 216
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
OFST2CL5 Adj CIS-ch5 offset: color mode, 600 dpi
Lv.1 Details To adjust the offset (black level) of the Scanner Unit on channel 5 in
color mode with 600 dpi.
This setting is not available for a 25-ppm machine.
Use case When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 216
Related service mode COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo It is updated automatically when the value of CL-AGC is changed.
8-64
8-64