Displaying Logs - Canon imageRUNNER ADVANCE C350 series Service Manual

2
Technical Explanation > Updater > System Management Operations > Displaying Logs

■ Displaying Logs

● Update Logs
This section describes how to confirm System Option/MEAP Application Installation Logs and
Firmware Update Logs.
1. Start [Service Mode] at Level 1.
2. Press [Updater] button.
3. Press [Software Management Settings] button.
4. Press [Select Log Display] button.
2 Technical Explanation > Updater > System Management Operations > Displaying Logs
5. Press [Display Update Logs] button.
6. System Option/MEAP Application Installation Logs and Firmware Update Logs are shown.
Press [OK] button to exit this operation.
F-2-407
F-2-408
2-232
F-2-409
F-2-410
2-232