6) Remove the small cover of the Controller Box Cover. (Removed small cover of the
Controller Box Cover will be used in step 10.)
• 1 Screw (Removed Screw will be used in step 10)
1x
7) Remove the Controller Box Cover.(Removed Controller Box Cover will be used in step 10.)
• 2 Connectors. (Removed 2 Connectors. will be used in step 10.)
• 1 Screw (Removed Screw will be used in step 10.)
• 10 Hooks
CAUTION:
When handling the hard disc, be careful not to vibrate or drop it.
2x
9
Installation > Copy Card Reader-F1 > Installation Procedure
F-9-43
1x
F-9-44
9
Installation > Copy Card Reader-F1 > Installation Procedure
8) Remove the Face Plate. (Removed Face Plate will not be used.)
• 2 Screws (Removed screws will be used in step 9.)
2x
9) Install the Card Reader Relay Connector Unit.
• 1 Connector
• 2 Screws (Use the screws removed in step 8.)
2x
9-19
F-9-45
1x
F-9-46
9-19