Canon imageRUNNER ADVANCE C350 series Service Manual page 948

■ INT-FACE
COPIER> OPTION> INT-FACE
NWCT-TM Timeout setting of network connection
Lv.2 Details To set the time to keep network connection between this machine
and the PC application (keep-alive setting).
As the value is incremented by 1, the time is increased by 1 minute.
Use case When using PC application
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 5
Default value 5
Supplement/memo Expected PC application: Network print application, E-mail function,
cascade copy, MEAP network application, etc.
8
Service Mode > COPIER > OPTION > LCNS-TR
T-8-54
8 Service Mode > COPIER > OPTION > LCNS-TR
■ LCNS-TR
COPIER> OPTION> LCNS-TR
ST-SEND Installation state dspl of SEND function
Lv.2 Details To display installation state of SEND function when disabling the
function with license transfer.
Use case When checking whether SEND function is installed
Adj/set/operate method 1) Select ST-SEND.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-SEND.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-SEND Trns license key dspl of SEND function
Lv.2 Details To display transfer license key to use SEND function when the
function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-SEND.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-SEND.
Display/adj/set range 24 digits
ST-ENPDF Install state display of encrypted PDF
Lv.2 Details To display installation state of encrypted PDF transmission function
when disabling the function with license transfer.
Use case When checking whether encrypted PDF transmission function is
installed
Adj/set/operate method 1) Select ST-ENPDF.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-ENPDF.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-ENPDF Trns license key dspl of encrypted PDF
Lv.2 Details To display transfer license key to use encrypted PDF transmission
function when the function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-ENPDF.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-ENPDF.
Caution This mode is enabled when SEND function is installed.
Display/adj/set range 24 digits
8-178
8-178