Canon imageRUNNER ADVANCE C350 series Service Manual page 1030

12) Install the 2 Wire Saddles.
13) Connect the connector of the Power Cable (270mm; A:HDD-Pow1) to the HDD,
secure it with the Harness Guide, and connect it to the connector of the Encryption Board.
2x
1x
9
Installation > HDD Data Encryption Kit-C6 > Installation Procedure
14)
it with the Harness Guide, and connect it to the Encryption Board.
F-9-141
15)
Harness Guide, and connect it to the the Encryption Board.
16)
A:HDD-Sig) with the 2 Wire Saddles.
F-9-142
9 Installation > HDD Data Encryption Kit-C6 > Installation Procedure
Connect the connector of the Signal Cable (250mm; A:HDD-Sig) to the HDD, secure
2x
3x
Connect the Signal Cable (250mm; A:HDD-Sig) to the HDD, secure it with the
SSecure the Power Cable (270mm; A:HDD-Pow1) and the Signal Cable (250mm;
2x
3x
9-53
F-9-143
F-9-144
9-53