Canon imageRUNNER ADVANCE C350 series Service Manual page 197

2
Technical Explanation > MEAP > Enhanced System Application Management > SSO-H (Single Sign-On-H) overview
● Setting the Authentication Method
In the case of SSO-H, it is possible to use a combination of multiple authentication methods.
The combination can be changed from the SSO-H setting screen. (For details, refer to
e-Manual > MEAP > Menu for Administrators > Setting the SSO-H > "Setting the User
Authentication System".)
Note:
The default settings are shown below.
• User authentication method : "Server Authentication + Local Device Authentication"
• Type of authentication : "Active Directory"
CAUTION:
• To ensure the security, it is recommended to change the password and the user
name of the Local Device Authentication administrator from those at the time of
shipment immediately after you have started using SSO-H.
• Since department ID and password are not assigned to domain users, distributing
setting information where the department ID is enabled to a device where the server
authentication is enabled may make the device unable to be logged in. If the device
has become unable to be logged in, follow "Remedy to Be Performed When the
Device Has Become Unable to Be Logged in" in this manual.
● Using an Accounting Product When SSO-H Is Used
SSO-H has collaborative linkage with NetSpot Accountant, imageWARE / iW Accounting
Manager, imageWARE Enterprise Management Console / iW Management Console Access
Management Plug-in, imageWARE Enterprise Management Console / iW Management
Console Accounting Management Plug-in.
For details on the combination, refer to the User's Manual or Service Manual of the product.
2 Technical Explanation > MEAP > Enhanced System Application Management > SSO-H (Single Sign-On-H) overview
● Conducting Department ID Management When SSO-H Is Used
Department ID Management can be conducted also when SSO-H is used for login service.
Usage Conditions
In order to allow coexistence of SSO-H and Department ID management, the following
conditions need to be satisfied.
• Only "Local Device Authentication" can be used as the user authentication method.
• The department ID and password have been already set for the SSO-H login user before
enabling department ID management.
• The information (the department ID and password) set for the login user coincides with the
information registered in Department ID Management.
Setting Procedure
In order to allow coexistence of SSO-H and Department ID management, the following
F-2-230
procedure needs to be performed to enable the setting.
1) Change the authentication method to DA (Default Authentication).
Access SMS, and select [Default Authentication] in [Enhanced System Application
Management] > [Login Service]. (How to log in to SMS can be found in "Login to SMS".)
2) Restart the device.
Restart the device in order to reflect the changes in login service.
2-154
F-2-231
2-154