Canon imageRUNNER ADVANCE C350 series Service Manual page 440

4
Disassembly/Assembly > Image Formation System > Removing the Bottle Drive Unit (Y/M/C/Bk) > Procedure
Removing the Bottle Drive Unit (Y/M/C/Bk)
F-4-336
■ Preparation
1) Remove the Rear Cover 1(Refer to page 4-35).
2) Remove the Left Upper Cover (to be removed for models equipped with a fax)
(Refer to page 4-37).
3) Remove the Fax Speaker Unit (to be removed for models equipped with a fax)
(Refer to page 4-105).
4) Remove the Fax Unit (to be removed for models equipped with a fax)(Refer to page 4-105).
5) Remove the Main Controller Unit(Refer to page 4-84).
6) Remove the Low-voltage Power Supply PCB Unit(Refer to page 4-97).
7) Remove the DC Controller PCB Unit(Refer to page 4-91).
8) Remove the Delivery Tray(Refer to page 4-46).
9) Remove the Toner Container (Y/M/C/Bk) (remove the toner container of the color to be
removed)(Refer to page 4-113).
■ Procedure
NOTE:
In this procedure, the procedures for the Bottle Drive Unit (C Bk) are described.
Perform the same procedure for removing the Bottle Drive Unit (Y M).
4 Disassembly/Assembly > Image Formation System > Removing the Bottle Drive Unit (Y/M/C/Bk) > Procedure
1) Free the Harness [1].
• Harness Guide [A]
F-4-337
2) Remove the Bottle Drive Unit (C Bk) [1].
• 1 Connector [2]
• 4 Screws [3]
• 2 Bosses [4]
[3]
[4]
[3]
1x
1x
[2] [3]
4x
[3] [4]
4-133
[1] [A]
F-4-338
[1]
F-4-339
4-133