Waste Toner Feeding Area - Canon imageRUNNER ADVANCE C350 series Service Manual

2
Technical Explanation > Image Formation System > Controls > Waste Toner Feeding Area
● Detection of the completion of toner replacement
Detection of the completion of replacement
Detection timing When a replacement of Toner Container is detected
Alarm Code 10-0100
Remarks The toner supply count is reset at the same time.
NOTE:
The Hopper Assembly of this machine is extremely small, so printing will not be possible
after detecting the absence of toner since there will be no toner in the Hopper Assembly.
Therefore, the 3-level display, which is available with, for example, imageRUNNER
ADVANCE C5051 series, is not available.
* Whether or not to display the Remaining Toner Error Message can be set in COPIER
> OPTION > DSPLY-SW > TNR-WARN (Lv.1).
Related error codes:
E025-0110 Bottle Motor (YM) lock detection error (Y)
E025-0210 Bottle Motor (YM) lock detection error (M)
E025-0310 Bottle Motor (CK) lock detection error (C)
E025-0410 Bottle Motor (CK) lock detection error (Bk)
E025-0168 No toner detection error (Y)
E025-0268 No toner detection error (M)
E025-0368 No toner detection error (C)
E025-0468 No toner detection error (Bk)
2 Technical Explanation > Image Formation System > Controls > Waste Toner Feeding Area

■ Waste Toner Feeding Area

● Overview
To feed waste toner of the drum cleaning unit and the ITB cleaning unit to the Waste Toner
Container.
T-2-37
Bk Drum _ ITB Motor
M02
Waste Toner
Feed Screw
M07
Registration Motor
Parts name
Waste Toner Feed Screw
Waste Toner Container
Cleaning Screw
Waste Toner Screw
Registration Motor
Waste Toner Sensor PCB
CL Drum Motor
M01
Cleaning
Screw
Waste Toner Container
Waste Toner Sensor PCB
(UN17)
Function
Waste toner from the ITB Cleaning Unit is fed.
Waste toner is collected.
Residual toner is fed.
Waste toner inside the Waste Toner Container is raked.
Rotates the Waste Toner Feed Screws.
Detects the toner amount in the Waste Toner Container.
2-81
Waste Toner
Screw
F-2-111
T-2-38
2-81