Canon imageRUNNER ADVANCE C350 series Service Manual page 289

Table of Contents

Advertisement

2
Technical Explanation > DCM > DCM > Import/Export by Service Mode (Internal)
■ Import/Export by Service Mode (Internal)
Import/export by service mode allows the selection between USB flash drive and internal
HDD for the save destination of DCM files.
The procedure of import/export when internal HDD is selected is shown below.
It can be used when recovering the initial status after having tried multiple setting changes
temporarily for troubleshooting, etc.
Note:
DCM must not be used when replacing PCBs. Be sure to perform backup of DCON/
RCON in service mode
Maximum of 2 files can be saved in the host machine's HDD
● Export Procedure
Preparation
There is no need to newly prepare for saving to internal HDD.
Overall flow
Here is a procedure for exporting to internal HDD.
1. Select internal HDD as save destination (LIST=2)
2. Set the password
3. Export to internal HDD
Procedure
1. Log in to service mode and press [BACKUP].
2
Technical Explanation > DCM > DCM > Import/Export by Service Mode (Internal)
2. Select [LIST] after the screen moves to <BACKUP>.
3. When saving to the internal HDD, enter "2" and press [OK].
F-2-442
2-246
F-2-443
F-2-444
2-246

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents