Canon imageRUNNER ADVANCE C350 series Service Manual page 545

● Downloading System Software
The system software is updated according to the set of versions selected from the USB
menu. The system software is stored in the temporary storage space on the FLASH PCB
immediately after the system software is downloaded. After the download process, the
system software is written in the system area on the FLASH PCB and the data saved in
the temporary storage space is deleted.This machine is automatically restarted when the
writing process is completed. When writing process is successfully completed, the machine is
restarted with the new version of the system software. When an error occurs, the machine is
restarted with the previous version of the system software.
Tasks in the customer site
Task in the office
USB memory
storage device
System
Software
Copying the system software
システムソフトウェアのコピー
2)
The system software is written
3)
<<<<< download shell >>>>>
[ SYSTEM JPja-m ] - - - - Upgrading complete
[ SYSTEM ZZ ] - - - - - - - Upgrading complete
[ SYSTEM JPja-w ] - - - - Upgrading complete
[ SYSTEM ZZ ] - - - - - - - Upgrading complete
[ FONT F ] - - - - - - - - - - Upgrading complete
[ FONT G ] - - - - - - - - - -
Upgrading complete
+++ Switch OFF the power then ON. +++
FLASH
Temporary
memory space
System
memory area
System
Software
6
Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Registering System Software
Download the system software
1)
- - - Download Mode - - -
[ iR2270i-JPjaxxxx-MN.dsh ] - - - - - - - - - - Complete
[ iR2270iM-JPjaxxxx-1F77-MN.PRG ] - - - -
Complete
[ iR2270iM-ZZjaxxxx-49AD.PRG ] - - - - - - - Complete
[ iR2270iW-JPjaxxxx-5C16-MN.PRG ] - - - - Complete
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - - Complete
[ iR2270iF-JPjaxxxx-DE96-ICC.PRG ] - - - - Complete
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - -
Complete
[ iR2270iG-JPjaxxxx-EC30-ICC.PRG ] - - - - Complete
FLASH
Temporary
memory space
System
Software
System
Software
System
memory area
Automatically restarted
4) Automatically restarted
主電源スイッチOFF/ON
Start with the new version.
5)
6 Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Registering System Software
■ Registering System Software
● System software storage folder to SST
Register the system software stored in the folder to SST.
NOTE:
When the system software has been compressed, decompress the compression file
and then register to SST.
Preparation
Requirements:
• PC with SST Ver.4.73 or later installed
• The system software for this machine
Steps to register the system software
1) Start the PC.
2) Start SST.
3) Click the "Register System Software" button.
F-6-47
6-34
F-6-48
6-34