9) Remove the Small Cover on the left side with a flat-blade screwdriver. (Removed Small
Cover will not be used.)
CAUTION:
When removing the cover, do not insert a screwdriver in the oval hole.
9
Installation > IC Card Reader BOX-A1 > Installation Procedure > When Installing to the Host Machine
10)
• 1 Boss
• 2 Screws (TP; M3x6)
F-9-74
11)
• 3 Screws (Removed screws will be used in step 22.)
F-9-75
9
Installation > IC Card Reader BOX-A1 > Installation Procedure > When Installing to the Host Machine
Install the IC Card Reader Box Unit Lower Cover to the host machine.
TP
M3x6
2x
Open the Front Cover and remove the Left Lower Cover. (Removed Left Lower Cover
will be used in step 22.)
3x
9-29
F-9-76
F-9-77
9-29