Rls Authentication - Canon imageRUNNER ADVANCE C350 series Service Manual

2
Technical Explanation > MEAP > System Application Management > RLS Authentication
Note:
If you want to change the display language, select the language from the drop-down list
of [Language] at the upper right of the login screen, and click the update button.
Note:
If the wrong password is entered, the following window is displayed. The user's system
administrator may have changed the password, so confirm the password with the
system administrator. Note that there is no special password for service.
2 Technical Explanation > MEAP > System Application Management > RLS Authentication
F-2-256
F-2-257

■ RLS Authentication

Login without using the SMS login window but by entering the user ID and password for
authentication in the RLS (Remote Login Service) window. The user information (user name
and password) used is the information for server authentication or local device authentication.
The login procedures are as follows.
1) Access SMS by RLS Authentication from the PC browser on the same network as the
MEAP device.
URL: https://<IP address of MEAP device>:8443/sms/rls/
Ex.) https://172.16.188.240:8443/sms/rls/
Note:
• To encrypt the password information input when logging in, SSL of the login screen was
made effective. However, it is redirected to new URL (effective SSL) even when accessing
with URL (non-SSL) before.
Note:
• When the device authentication method used is server authentication, enter the user
name, password and login destination registered with authentication server and then click
"Log In".
• If the authentication method used is local device authentication, enter the user name,
password and login destination registered in the device and click "Log In" button.
The user information is set as below for local device authentication by default. Both are
case sensitive.
• User Name: Administrator
• Password: password
2-164
F-2-258
2-164