Canon imageRUNNER ADVANCE C350 series Service Manual page 937

COPIER> OPTION> USER
PDL-NCSW Card mngm setting for PDL print job
Lv.2 Details To set to make PDL print job to be subject to card management by
the Card Reader.
With the setting to enable this mode, PDL print is available only
when the card ID of the card inserted to the Card Reader matches
the department ID.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: PDL print is available with no card inserted.
1: PDL print is available only when the card ID matches the
department ID when the card is inserted.
Default value 0
PS-MODE Compatible mode setting at PS usage
Lv.2 Details To set the image processing at PS print.
Although the same line width is set, it may differ depending on the
drawing position.
When 8 is set, line width can be uniformed (strokeadjust = ON).
Use case Upon a request from user using PS function
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
0 to 7: No use of Adobe genuine PS (used with compatible PS
machine)
8: Set strokeadjust = ON
9 to 65535: Spare
Default value 0
CNCT-RLZ Setting of connection serialize function
Lv.2 Details Connection serialize is a function to assure job grouping function of
imageWARE Output Manager Select Edition V1.0.
The setting to enable this mode can avoid job rearrangement
because the machine does not receive job data from other
connection until it completes job data reception from the current
connection.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Supplement/memo Connection: Connection to be established through network between
multiple hosts (PC, etc).
Job grouping function: A function of imageWARE Output Manager
Select Edition V1.0. This is to prevent job interruption from other PC
by group job (sending multiple jobs in 1 session at job transmission).
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER> OPTION> USER
COUNTER7 Setting of software counter 7
Lv.1 Details To set counter type for software counter 7 on the Counter Check
screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: Not registered
Default value 0
COUNTER8 Setting of software counter 8
Lv.1 Details To set counter type for software counter 8 on the Counter Check
screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: Not registered
Default value 0
2C-CT-SW Set of color counter at 2-color mode
Lv.2 Details To set whether to use the mono color counter or full color counter for
count-up in 2-color mode.
Use case When supporting 2-color mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Mono color counter, 1: Full color counter
Default value JP:0, USA:1, EUR:1, AU:1, CN:1, KR:1, TW:1, ASIA:1
JA-FUNC ON/OFF of job archive function
Lv.2 Details To set ON/OFF of job archive function.
Use case When using the job archive function
Adj/set/operate method Display only. No change is available.
Caution Changing this mode is not available in service mode, but only
reference is available.
This mode can be set only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8-167
8-167