Canon imageRUNNER ADVANCE C350 series Service Manual page 912

COPIER> OPTION> IMG-FIX
TMP-TB17 Fixing control temperature: Rcycl ppr 3
Lv.1 Details To set the offset of fixing control temperature for recycled paper 3 (91
to 105 g/m2).
As the value is incremented by 1, the control temperature is
increased by 5 deg C from the specified value.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
Use case When offset/fixing failure occurs on recycled paper 3
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image
failure occurs when setting an extreme value.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
8
Service Mode > COPIER > OPTION > IMG-TR
T-8-40
8 Service Mode > COPIER > OPTION > IMG-TR
■ IMG-TR
COPIER > OPTION> IMG-TR
2TR-RVON Setting of trailing edge weak bias
Lv.2 Details To set the conditions to apply weak bias on the trailing edge of paper.
When 0 is set, weak bias is applied to the trailing edge of paper in
single Bk mode. When 1 is set, the bias is applied in single Bk mode/
color mode.
When 2 is set, the bias is not applied.
Use case When an image failure (white spots on the trailing edge) occurs
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Single Bk mode, 1: Single Bk mode/color mode, 2: OFF
Default value 0
8-142
T-8-41
8-142