Canon imageRUNNER ADVANCE C350 series Service Manual page 940

COPIER> OPTION> USER
JA-FORMT Display of job archive record format
Lv.2 Details To display the format of images for job archives recorded in jobs
other than FAX reception and IFAX reception, etc.
Whether the images processed by Packet JPEG are recorded in
Packet JPEG, or converted into Raster JPEG and then recorded is
displayed.
Only display is available in service mode. The setting is available
only in the MEAP applications which support job archiving.
Use case Upon user's request
Adj/set/operate method Display only. No change is available.
Caution Changing this mode is not available in service mode, but only
reference is available.
This mode can be set only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: Packet JPEG, 1: Raster JPEG
Default value 0
HDCR-DSW Dspl/hide of HDD complete delete ON/OFF
Lv.1 Details To set whether to display or hide "Hard Disk Data Complete Deletion"
in Settings/Registration.
With this setting, HDD data complete deletion function is available
with ON/OFF button on the screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not change the setting carelessly because the user (administrator)
cannot use the HDD data complete deletion function when 0 is set.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
Related UI menu Management Settings> Data Management> HDD Data Complete
Deletion> Hard Disk Data Complete Deletion
BWCL-DSP ON/OFF of color/B&W selection screen
Lv.2 Details To set whether to display the color/B&W selection screen to select
the default of the color mode.
Use case When displaying the color mode default selection screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER> OPTION> USER
STPL-MAX Set of max number of sheets for staple
Lv.2 Details To set the maximum number of sheets to be stapled in the Finisher.
When 1 is set, the stapling capacity becomes 50 sheets.
Use case Upon user's request (to increase the stapling capacity)
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Be sure to get approval from the user by telling that misalignment or
jam may occur depending on the degree of paper curl.
Display/adj/set range 0 to 1
0: 30 sheets, 1: 50 sheets
Default value 0
SCALL-SW [Not used]
SCALLCMP [Not used]
USBH-DSP Display/hide of "Use USB Host"
Lv.2 Details To set whether to display "Preferences> External Interface> USB
Settings> Use USB Host".
By selecting "1: Display", whether to use USB host on USB setting
screen can be selected.
Use case When switching to display or hide "Use USB Host" on USB setting
screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related UI menu Preferences> EXternal Interface> USB Settings> Use USB Host
USBM-DSP Dspl/hide of USB ex-memory device driver
Lv.2 Details To set whether to display "Preferences> External Interface> USB
Settings> Use MEAP Driver for USB External Device".
By selecting "0: Hide", the item is not displayed, and the user
administrator cannot change the setting of the MEAP driver for the
USB external memory device.
Use case When prohibiting the user administrator to change the setting of
"Use MEAP driver for USB external device", set 0 after the specified
setting is completed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
Related UI menu Preferences> External Interface> USB Settings> Use MEAP Driver
for USB External Device
8-170
8-170