Canon imageRUNNER ADVANCE C350 series Service Manual page 543

● Optional language selection
"Optional Language Setting" is added to "System Management".
By default, "Don't download optional language" is selected.
When "Download optional language" is selected, up to two optional languages can be
selected.
The firmware of the optional languages on the list are excluded from Assist Mode necessary
firmware.
Assist Mode can be executed without registering the optional language firmware to SST.
● Optional language confirmation
When either of the following conditions is satisfied, the optional language confirmation
message appears when "Start" button is clicked.
Optional language is selected in the "Optional Language Setting" of "System Management".
Any optional language is installed to the connected machine.
Maximum number of the optional languages installed to the machine is two.
The optional language already installed to the connected machine is always selected, and it
cannot be removed from the machine with SST.
Even if the firmware of the installed optional language is not registered to SST, it is counted
as the installed optional language.
6
Troubleshooting > Version Upgrade > Version Upgrade via SST > Optional language support
F-6-43
6 Troubleshooting > Version Upgrade > Version Upgrade via SST > Optional language support
The number of the selectable optional languages in the "Optional Language Setting" is
equivalent to the maximum number of optional languages.
The number of the optional languages to be added to the machine is equivalent to the
maximum number of optional languages minus the number of the optional languages installed
to the machine.
Error will not occur even the number of the installed optional languages is greater than the
maximum number of the optional languages.
In such a case, any new optional language cannot be added, but the firmware of the installed
optional language is downloaded in the Assist Mode.
The picture shown below is the example of the case that Finnish is installed to the machine,
and Danish and Dutch are selected in the "Optional Language Setting".
Only two optional languages can be installed to the machine and Finnish is already installed.
Therefore, either Danish or Dutch can be installed to the machine.
6-32
F-6-44
6-32