Canon imageRUNNER ADVANCE C350 series Service Manual page 891

OPTION
■ FNC-SW
COPIER> OPTION> FNC-SW
MODEL-SZ Fixed magnifictn & DADF orgnl dtct size
Lv.1 Details To set the fixed magnification ratio display and the original detection
size with DADF.
It is set automatically at the time of installation of the Reader
according to the location.
Use case - Upon user's request
- When Chinese paper (16K paper) is used
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When the value of MODEL-SZ is changed, the value of FEED-CNF
is also changed.
When MODEL-SZ = 0, 2, or 3: FEED-CNF = 0
When MODEL-SZ = 1: FEED-CNF = 1
Display/adj/set range 0 to 3
0: AB configuration (6R5E) for Japan, 1: Inch configuration (5R4E)
for North/Middle/South America, 2: A configuration (3R3E) for
Europe, 3: AB/Inch configuration (6R5E) for Asia, Oceania, South
America
Default value It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW > MODELSZ2, KSIZE-SW, FEED-
CNF
DH-SW ON/OFF of auto D-half control
Lv.2 Details To set ON/OFF of auto D-half control.
When 0 (D-half control is OFF.) is set, ARCDT-SW becomes 1
(ARCDAT control is OFF.).
Use case - When D-half-related failure occurs/when identifying the cause of
D-half-related failure
- Upon user's request
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Be sure to set the value back to 1 (ON) after servicing.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Related service mode COPIER> OPTION> FNC-SW> ARCDT-SW
Related UI menu Adjustment/Maintenance> Adjust Image Quality> Auto Adjust
Gradation> Full Adjust
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER> OPTION> FNC-SW
CONFIG Set country/regn/lang/location/ppr size
Lv.1 Details To set the country/region, language, location, paper size
configuration for multiple system software in HDD.
Use case Upon user's request
Adj/set/operate method 1) Select the setting item.
2) Switch with +/- key, and then press OK key.
3) Turn OFF/ON the main power switch.
Caution The initial value differs according to the location.
Display/adj/set range XX YY.ZZ.AA
XX: Country/region
JP: Japan, US: United States, GB: England, FR: France, DE:
Germany, IT: Italia, AU: Australia, SG: Singapore, NL: Netherlands,
KR: Korea, CN: China, TW: Taiwan, ES: Spain, SE: Sweden, PT:
Portugal, NO: Norway, DK: Denmark, FI: Finland, PL: Poland, HU:
Hungary, CZ: Czech, SI: Slovenia, GR: Greek, EE: Estonia, RU:
Russia, AD: Andorra, AL: Albania, AM: Armenia, AR: Argentine, AT:
Austria, BA: Bosnia Herzegovina, BE: Belgium, BG: Bulgaria, BO:
Bolivia, BR: Brazil, CA: Canada, CH: Switzerland, CL: Chile, CY:
Cyprus, HR: Croatia, ID: Indonesia, IE: Ireland, IL: Israel, IN: India,
IS: Iseland, LU: Luxembourg, LV: Latvia, MX: Mexico, MY: Malaysia,
NZ: New Zealand, PE: Peru, PH: Philippine, PY: Paraguay, RO:
Romania, SK: Slovakia, TH: Thailand, TR: Turkey, UA: Ukraine, UY:
Uruguay, VE: Venezuela, VN: Vietnam
YY: Language (Fixed; e.g. ja: Japanese)
ZZ: Location (Fixed; e.g. 00: CANON)
AA: Paper size configuration (00: AB configuration, 01: Inch
configuration, 02: A configuration, 03: Inch/AB configuration)
Default value It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> MODEL-SZ
W/SCNR Setting of Reader Unit installation
Lv.1 Details To set installation of the Reader Unit.
1 (Installed) is automatically selected once the Reader Unit is
detected at the start of the machine.
Use case When installing/removing the Reader Unit
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not installed, 1: Installed
Default value According to the setting at shipment
8-121
8-121