Canon imageRUNNER ADVANCE C350 series Service Manual page 938

COPIER> OPTION> USER
JA-JOB Setting of job archive target job
Lv.2 Details To set the job type subject to job archive.
With the job archive function enabled, archive operation is executed
when executing the target job.
Use case When using the job archive function
Adj/set/operate method Display only. No change is available.
Caution Changing this mode is not available in service mode, but only
reference is available.
This mode can be set only with the MEAP program that supports job
archive.
Display/adj/set range 0: N/A, 3: Limited to FAX/IFAX, 0xFFFFFFFF: All jobs
Default value 0
Related service mode COPIER> OPTION> USER> JA-FUNC
JA-RESTR Setting of job archive limit items
Lv.2 Details To set restriction items for job archive specification.
With job archive function enabled, follow the setting to execute
operation to restrict specification.
Use case When using the job archive function
Adj/set/operate method Display only. No change is available.
Caution Changing this mode is not available in service mode, but only
reference is available.
This mode can be set only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
32 specification restrictions with Bit definition
Bit0: Function to obtain image file (0: OFF, 1:ON)
Bit1: Function to compose form registration (0: OFF, 1: ON)
Bit2: Function to edit document (0:OFF, 1: ON)
Default value 0
Related service mode COPIER> OPTION> USER> JA-FUNC
LDAP-SW Search condition set for LDAP server
Lv.1 Details To set the condition to search e-mail address, etc. from LDAP server.
Use case When specifying condition to search e-mail address, etc. from LDAP
server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 5
0: Includes the next, 1: Not include the next, 2: Equivalent to the
next, 3: Not equivalent to the next, 4: Starts with the next, 5: Finishes
with the next
Default value 4
Related service mode COPIER> OPTION> USER> LDAP-DEF
Supplement/memo LDAP (Lightweight Directory Access Protocol): Registering LDAP
server enables to search e-mail address, etc. from LDAP server and
the result can be registered in the Address Book, etc. Registration is
available by the following: Set Destination> Register LDAP Server
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER> OPTION> USER
FROM-OF Deletion of mail sender's field
Lv.1 Details To set whether to delete the sender's field (From) at the time of
e-mail transmission.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Even if 1 is set, sender's field is added depending on the e-mail
server settings.
Display/adj/set range 0 to 1
0: Retained, 1: Deleted
Default value 0
DOM-ADD Additional entry of e-mail destn domain
Lv.2 Details To set to automatically add the domain specified in Settings/
Registration to the sending address (To) entered at the time of e-mail
transmission.
If specifying "xxx.com" as a domain in Settings/Registration in
advance, just entering "aaa" enables to display "aaa@xxx.com"
when sending e-mail.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not added, 1: Added
Default value 0
FILE-OF File send prohibition to entered address
Lv.1 Details To set to prohibit address entry at the time of file transmission.
File transmission is not available by entering the address because of
no display of "File" on the transmission screen.
The addresses already registered in the Address Book can be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the Address Book can be
used.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
8-168
8-168