Canon imageRUNNER ADVANCE C350 series Service Manual page 881

■ PART-CHK
COPIER> FUNCTION> PART-CHK
CL Specification of operation Clutch
Lv.1 Details To specify the Clutch to operate.
Use case When replacing the Clutch/checking the operation
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 1
1: Developing Cylinder Clutch (Y) (CL01)
2: Developing Cylinder Clutch (M) (CL02)
3: Developing Cylinder Clutch (C) (CL03)
4: Developing Cylinder Clutch (Bk) (CL04)
Related service mode COPIER> FUNCTION> PART-CHK> CL-ON
CL-ON Operation check of Clutch
Lv.1 Details To start operation check of the clutch specified by CL.
The specified clutch is turned ON 1 second from the Developing
Motor (M03) is turned ON, and then both the motor and the clutch
are turned OFF 5 seconds later.
Use case When replacing the Clutch/checking the operation
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> PART-CHK> CL
FAN Specification of operation Fan
Lv.1 Details To specify the Fan to operate.
Use case When replacing the Fan/checking the operation
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 1 to 10
1: Drum Unit Suction Cooling Fan (FM01), 2: Duplex Cooling Fan
(FM04), 3: Delivery Cooling Fan (FM03), 4 to 10: Not used
Default value 1
Related service mode COPIER> FUNCTION> PART-CHK> FAN-ON
FAN-ON Operation check of Fan
Lv.1 Details To start operation check of the Fan specified by FAN.
Use case When replacing the Fan/checking the operation
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> PART-CHK> FAN
8
Service Mode > COPIER > FUNCTION > PART-CHK
8 Service Mode > COPIER > FUNCTION > PART-CHK
COPIER> FUNCTION> PART-CHK
MTR Specification of operation Motor
Lv.1 Details To specify the Motor to operate.
Use case When replacing the Motor/checking the operation
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 1 to 23
1: CL Drum Motor (M01), 2: Bk Drum_ITB Motor (M02), 3:
Developing Motor (M03), 4: Fixing Motor (M04), 5: Cassette 1_Multi-
purpose Traty Pickup Motor (M05), 6: Pre-registration Motor (M06),
7: Registration Motor (M07), 8: Reverce Motor (M08), 9: Bottle Motor
(YM) (M09), 10: Bottle Motor (CK) (M10), 11: Cassette 1 Lifter Motor
(M11), 12: Cassette 2 Pickup Motor (M102), 13: Cassette 2 Pullout
Motor (M106), 14: Cassette 2 Lifter Motor (M104), 15: Cassette 3,
4 Pickup Motor (M101), 16: Cassette 3, 4 Pullout Motor (M105), 17:
Cassette 3, 4 Lifter Motor (M103), 18: Registration Motor (Waste
Toner Container, Negative rotation operation of M07), 19 to 23: Not
used
Default value 1
Related service mode COPIER> FUNCTION> PART-CHK> MTR-ON
MTR-ON Operation check of Motor
Lv.1 Details To start operation check of the Motor specified by MTR.
The operation automatically stops after operation of 5 seconds.
Use case When replacing the Motor/checking the operation
Adj/set/operate method Select the item, and then press OK key.
Caution While the Bottle Motor is active, be sure to remove the Toner
Container. Otherwise, toner leakage may occur in the machine.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> PART-CHK> MTR
SL Specification of operation Solenoid
Lv.1 Details To specify the Solenoid to operate.
Use case When replacing the Solenoid/checking the operation
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 1 to 3
1: Primary Transfer Disengagement Solenoid (SL01), 2: Duplex
Solenoid (SL02), 3: Registration Shutter Solenoid (SL03)
Default value 1
Related service mode COPIER> FUNCTION> PART-CHK> SL-ON
SL-ON Operation check of Solenoid
Lv.1 Details To start operation check for the Solenoid specified by SL.
The operation stops after "ON for 0.5 sec" => "OFF for 10 sec" => "ON
for 0.5 sec" => "OFF for 10 sec" => "ON for 0.5 sec".
Use case When replacing the Solenoid/checking the operation
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> PART-CHK> SL
8-111
T-8-32
8-111