Canon imageRUNNER ADVANCE C350 series Service Manual page 1065

Report output upon completion of Initialize All Data/Settings
Consider using this report to provide to user as a material to inform of work details when
executing Initialize All Data/Settings upon user's request.
Operation after Initialize All Data/Settings
The machine is started normally at restart after Initialize All Data/Settings without displaying
the message (Turn OFF the main power supply on the right side of the machine) on the
screen to prompt shutdown
The report is output after startup.
******************************
*** System Information ***
******************************
<< Initialize All Data/Settings Report >>
Serial Number
Device Name
Overwrite Method for Deletion Mode
The following data stored in the device has been completely erased.
- Data stored in the temporary data area
- User generated data
- Settings under Settings/Registration (restored to factory defaults)
*1 display following one.
"Once with 0 (Null) Data"
"Once with Random Data"
"3 Times with Random Data"
"DoD Standard"
ZZZ99999
iR-ADV 8205 (iA8205)
Once with Random Data (*1)
Limitations
The language of the report is only English, and cannot be changed.
The report is output without fail (a function to select ON/OFF of report output is not provided).
There is no second output of report when the machine is turned ON without paper.
Only the output of this report remains in the job log.
● Deletion of Service Mode Setting Values
Service Mode Lev1 > Function> CLEAR > MN-CONT
Note:
When MN-CON clear is executed, the address book on the HDD is not deleted. As for
the user data, initialize all the data.
F-10-12
Appendix > Removal > Removal > Work Procedure
F-10-13
Appendix > Removal > Removal > Work Procedure
XXVII
XXVII