8) Remove the Signal Cable and the Power Cable of the host machine from the HDD. (The
removed cables will not be used.)
• 2 Connectors
• 1 Wire Saddle (Close as the Wire Saddle will not be used)
9) Install the Encryption Board to the Controller Cover.
• 4 Screws (TP; M3x6)
M3x6
9
Installation > HDD Data Encryption Kit-C6 > Installation Procedure
2x
1x
F-9-137
4x
F-9-138
9
Installation > HDD Data Encryption Kit-C6 > Installation Procedure
10)
Install the Harness Guide.
• 2 Hooks
• 1 Boss
11)
Connect the Signal Cable (135mm; A:Cont-Sig) and the Power Cable (135mm;
A:Cont-Pow) to the Encryption Board.
• 2 Connectors
F-9-139
2x
F-9-140
9-52
9-52