Canon imageRUNNER ADVANCE C350 series Service Manual page 764

Location Alarm Description
Code Code
04 0003 Cassette 3 Lifter error
7
Error•Jam•Alarm > Alarm Code > Alarm Code
Details
Cause: Error in Lift Motor or Lifter Sensor
Measures:
1. While Cassette 3 is removed, turn ON the power
and then insert Cassette 3.
When there is operation sound of the motor
1-1. Check the harness/connector between the DC
Controller and the Cassette 3 Lifter Sensor
2-1. Check if the Cassette 3 Lifter Sensor is installed.
3-1. Extend the Sensor Flag of the Cassette 3 Lifter
Sensor by approx. 1.5 mm with Plastic Film, etc.
4-1. Check the condition of the gear at the host
machine side (to see if there is missing or swing with
the gear)
5-1. Replace the Cassette 3 Lifter Sensor
6-1. Replace the DC Controller PCB
When there is no operation sound of the motor
1-2. Check the harness/connector between the DC
Controller and the Cassette 3 Lifter Motor
2-2. Check conduction of the fuse of the DC Controller
3-2. Check the condition of the gear at the host
machine side (to see if there is something missing or
swing with the gear)
4-2. Check the Cassette 3 Lifter Motor
5-2. Replace the DC Controller
7 Error•Jam•Alarm > Alarm Code > Alarm Code
Location Alarm Description
Code Code
04 0004 Cassette 4 Lifter error
Details
Cause: Error in Lift Motor or Lifter Sensor
Measures:
1. While Cassette 4 is removed, turn ON the power
and then insert Cassette 4.
When there is operation sound of the motor
1-1. Check the harness/connector between the DC
Controller and the Cassette 4 Lifter Sensor
2-1. Check if the Cassette 4 Lifter Sensor is installed.
3-1. Extend the Sensor Flag of the Cassette 4 Lifter
Sensor by approx. 1.5 mm with Plastic Film, etc.
4-1. Check the condition of the gear at the host
machine side (to see if there is missing or swing with
the gear)
5-1. Replace the Cassette 4 Lifter Sensor
6-1. Replace the DC Controller PCB
When there is no operation sound of the motor
1-2. Check the harness/connector between the DC
Controller and the Cassette 4 Lifter Motor
2-2. Check conduction of the fuse of the DC Controller
3-2. Check the condition of the gear at the host
machine side (to see if there is something missing or
swing with the gear)
4-2. Check the Cassette 4 Lifter Motor
5-2. Replace the DC Controller
7-150
7-150