Canon imageRUNNER ADVANCE C350 series Service Manual page 562

2. Press [Updater] button.
3. Press [Update Firmware] button.
4. Press [Apply Firmware] button.
6
Troubleshooting > Version Upgrade > Version Upgrade via CDS > b. UGW-linked Download (Remote Distribution Update)
F-6-80
F-6-81
F-6-82
6 Troubleshooting > Version Upgrade > Version Upgrade via CDS > b. UGW-linked Download (Remote Distribution Update)
5. Confirm the downloaded firmware and press [Yes] button.
6. The firmware is applied to the device. The device is automatically restarted when the
firmware is successfully applied.
7. When the device is restarted, confirm the version of the firmware.
1). Press [Check Counter Key] button on the control panel.
2). Press [Check Device Configuration] button.
3). Confirm if the updated firmware version corresponds to [Controller Version].
Now the firmware is successfully updated in the method of "Manual Download and Update".
CAUTION:
Firmware update will not be triggered when any of the following jobs remains in the
queue.
-Print
-Scan
-Fax (except I-FAX; this function is enabled for I-FAX only during Print/Scan operation)
See the section of "Wait for EOJ (end of job) Function" under "Limitations and
Cautions", "Updater" of Chapter 2 "Technology" of this manual for more detailed
information.
NOTE:
To contacts registered for E-mail notification on UGW, the E-mail is sent from UGW
upon completing firmware update.
6-51
F-6-83
6-51