14. D-STAR OPERATION (ADVANCED)
"TO" (Destination) setting
DMaking a "Local CQ" (Local Area) call
When "Local CQ" is selected on the TO SELECT
screen, "CQCQCQ" is set in "TO."
Example: Making a Local area call by accessing
the "Kirkland" repeater.
1. Touch "TO" to select, and then touch "TO" again.
2. Touch "Local CQ."
• Returns to the DR screen, and "CQCQCQ" is
displayed in "TO."
D Making a "Gateway CQ" (Gateway) call
When "Gateway CQ" is selected on the TO
SELECT screen, you can select the repeater
from the repeater list to make a gateway call.
Example: Making a Gateway CQ call to the
"Hirano" repeater from the "Kirkland"
repeater.
1. Touch "TO" to select, and then touch "TO" again.
2. Touch "Gateway CQ."
• Displays the REPEATER GROUP screen.
3. Touch the repeater group where your
destination repeater is listed.
4. Touch your destination repeater.
(Example: Hirano)
• Returns to the DR screen, and the selected
repeater name is displayed in "TO."
DUsing "Your Call Sign"
The "Your Call Sign" memory saves individual
or repeater station call signs. When you select
the call sign for the "TO" (Destination) setting,
you can make a Gateway call. When you call an
individual station through a gateway, the signal
is automatically sent to the last repeater that the
individual station accessed.
Therefore, even if you do not know where the
individual station is located, you can make a call.
NOTE: If the repeater, set in "FROM" (Access
repeater) has no Gateway call sign, you cannot
make a gateway call.
Example: Selecting "Rick" from "Your Call Sign."
1. Touch "TO" to select, and then touch "TO" again.
2. Touch "Your Call Sign."
• Displays the YOUR CALL SIGN screen.
3. Touch your destination station.
(Example: Rick)
• Returns to the DR screen, and the selected
name is displayed in "TO."
TIP: After selecting a destination repeater or
station, you can select another repeater or
station preset in your transceiver by rotating
.
14-7