Step2 Set "To" (Destination); Step3 Hold Down [Ptt] To Transmit; Making A Gateway Call; Step1 Set "From" (Access Repeater) - Icom ID-51A Basic Instructions

New2001 New2001
STEP 2 Set "TO" (Destination)
Push D-pad( %) to select "TO,"
q
and then push D-pad(Ent).
D-pad
(Ent)
( )
Push D-pad( !) to select "Lo-
w
cal CQ," and then push D-
pad(Ent).
Convenient!
The Local CQ call is used to call anyone, but you can call a
specific station by simply saying their call sign.
New2001
5

MAKING A GATEWAY CALL

A Gateway call can be made when a destination repeater is
selected in "TO" (Destination).
Repeater
Repeater area
What is a Gateway Call??
To call through your local area (access) repeater, repeater
gateway, and the Internet to your destination repeater.
Repeater
Repeater area
MAKING A LOCAL AREA CALL
STEP 3 Hold down [PTT] to transmit
at your normal voice level.
< Communication example
for a Local area call>
JA3YUA listening on
JP3YHH port A.
JA3YUA, this is JG3LUK.
Hello, how are you?
JG3LUK
JG3LUK, this is JA3YUA.
Thanks for the nice QSO and I
hope to talk to you again soon.
This is JA3YUA now clear of
the JP3YHH repeater.
Set "FROM" (Access repeater)
STEP 1
Push D-pad( !) to select
q
"FROM," and then push D-
pad(Ent).
D-pad
(Ent)
( )
Push D-pad( !) to select "Re-
w
peater List," and then push
D-pad(Ent).
Push D-pad( !) to select the
e
repeater group where your
access repeater is listed, and
then push D-pad(Ent).
Push D-pad( !) to select your
r
access repeater, and then
push D-pad(Ent).
4
4
Transmitting
JA3YUA
JA3YUA
28
New2001 New2001