Making A Gateway Repeater Call - Icom ID-5100A Full Manual

Previous view
6
D-STAR OPERATION <BASIC>

Making a Gateway Repeater call

A Gateway call can be made when a destination re-
peater is selected in "TO" (Destination).
• " " appears when the repeater does not connect
to the gateway.
What is a Gateway Repeater Call??
✓
To call through your local area (access) repeater, re-
peater gateway, and the Internet to your desired desti-
nation repeater.
1. Set "FROM" (Access repeater)
Touch [DR].
q
Check whether or not "FROM" is selected.
w
• If "FROM" is not selected, touch the "FROM" field.
Touch the "FROM" field.
e
• Opens the "FROM SELECT" screen.
Touch "Repeater List.
r "
• Opens the "REPEATER GROUP" screen.
Touch the repeater group where your access repeat-
t
er is listed. (Example: "11: Japan")
Touch your access repeater. (Example: "Hirano")
y
• Returns to the DR screen, and the selected repeater
name is displayed in "FROM."
For your reference:
The Gateway CQ call is used to call any repeater, but
you can call a specific station by simply saying their
call sign.
2. Set "TO" (Destination)
Touch the "TO" field.
u
• Check whether "TO" is selected.
Touch the "TO" field again.
i
• Opens the "TO SELECT" screen.
Touch "Gateway CQ.
o
• Opens the "REPEATER GROUP" screen.
!0 Touch the repeater group where your desired desti-
nation repeater is listed. (Example: "11: Japan")
!1 Touch your destination repeater.
(Example: "Hamacho")
• Returns to the DR screen, and the selected repeater
name is displayed in "TO."
3. Hold down [PTT] to transmit
• The LED1 on the microphone lights red.
6-14
"