Network Settings - Toshiba Strata CIX IP5000-UG-VC User Manual

Administrator Programming
IP5131-SDL Settings

Network Settings


To access the Network Setting screens
1. Press
2. From the IP Configurations screen, there are three screens for Network Settings
(shown below). Use the "
another.
Network Setting
DHCP : On
IP Addr : 192.168.0.10
Subnet : 0. 0. 0. 0
Dflt-GW : 0. 0. 0. 0
Station: 2000
[Set]
The general operation on the Network Settings screens is as follows:
• To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)
• Press the Cancel soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations Screen without rewriting the NV-RAM
data.
138
Hold 3 6 9
+ + + (simultaneously), choose the Network soft key.

(1/3) [Cancel]
Config

" and " " soft keys to move from one screen to
Network Setting
Node : 1
IPU Mode : Broadcast
P-IPU : 192. 168. 0. 77
S-IPU : 0. 0. 0. 0
Port Setting: Dynamic
[Set] (2/3) [Cancel]
Config
Strata CIX IP5000-series Telephone UG
Network Setting
Auto Login Mode : Auto
Auto Login Password:
[Set] (3/3) [Cancel]
Config
07/09