Table of Contents
Advertisement
—————————————————————————————————
Step 7: Program the Strata DK
For the PC-DKT to perform properly, some Strata DK telephone system settings are
necessary. Check with your System Administrator.
Note
Refer to the Strata DK Installation and Maintenance and Strata DK
Programming Manuals for additional information on these programs.
Program
10-1
System Assignments
31
Station Class of
Service
The PC-DKT does not require additional programming to activate TAPI, except if ANI,
DNIS, and/or Caller ID are to be sent from the PC-DKT to a TAPI compliant application.
To activate this feature, the following program changes are required:
03
Flexible PCB Slot
Assignments
20
Computer and Data
Interface Unit
Configuration
You are now ready to use the PC-DKT! If you had any problems during
installation, contact your Toshiba dealer or service engineer.
Installation
Settings/Comments
LED 17 ON
Reduces station-to-station talk path volume (-8 dB).
LED 01 ON
Disables the internal call Handsfree Answer Back function.
PDKU2 (OCA, DIU)
PDKU2 (DSS, OCA, DIU)
Assigns the appropriate PDKU2 cards as having the DIU
interface.
LED 11 RPCI-DI DNIS to PC Option
DNIS Number or Name tag information that is sent to a
telephone can be sent, or blocked. If DNIS information should
be sent from the PC-DKT to the TAPI application, turn LED 11
ON; if this information should not be sent, turn LED 11 OFF.
LED 10 RPCI-DI Caller ID and ANI to PC Option
If Caller ID and ANI information should be sent from the PC-
DKT to the PC to which it is connected, turn LED 10 ON; if this
information should not be sent to the PC, turn LED 10 OFF.
Step 7: Program the Strata DK
62
64
19
Advertisement
Table of Contents
