Program *80 - Call Forward Station Ring Assignment - Toshiba DK14 Programming Manual

Program *80 – Call Forward Station Ring Assignment
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
SELECT = CO Line Number
To specify a CO line range, enter
XXX✱XXX (low line ✱ high line).
Processor CO Line Range
DK14
DK40i
RCTUA
System Call Forward Station
Ring Mode Ring Assignment
Delay 2 (89)
Night
Delay 1 (88)
Immediate (87)
Delay 2 (86)
Day 2
Delay 1 (85)
Immediate (84)
Delay 2 (83)
Day
Delay 1 (82)
Immediate (81)
Program *80 Overview
Sets the Call Forward (CF) ringing assignment for ground/loop CO line calls. The station that
controls CF should be the only station programmed to ring in the appropriate Ringing Assignment
Programs (81~89). This program does not apply to Tie, DID, DNIS, or ANI lines.
Example application: A CO line call rings a CO line button on multiple stations, then Call
Forwards. CO line 001 is programmed to ring station 200, then after 12 secs., it delay rings
stations 201 and 202 (12 secs.). Then, CO line 001 will CF per station 203's CF setting. If station
203 has CF-No Answer, CO line 001 will ring station 203, and then CF. If station 203 has CF-All
Calls, CO line 001 will not ring station 203, but will forward immediately.
Programming for the above example:
Program 39 - Put CO line 001 button on stations 200~203.
Program 81 - Set CO line 001 to ring station 200 immediately.
Program 82 - Set CO line 001 to Delay Ring station 201 and 202
Program 83 - Set CO line 001 to Delay 2 Ring station 203.
Program *80 - Set CO line 001 to CF during Delay 2 Ring assignment (LED 03 On).
Set station 203 to CF to Voice Mail. When CO line 001 rings, the call will forward per station
203's CF (All Calls, No Answer, etc.) setting during the Delay 2 ring period. Note that only station
203 can be set to ring in the Delay 2 (Program 83) ring assignment to allow CF to operate. VM will
receive station 203's VMID (set via code #656).
Strata DK Programming 5/00
All RCTUs and BCUs with Release 3.2 and above
Station
LED 01, 04, and 07 On for all lines
✱
Processor CO Line Range
NA RCTUBA/BB
NA RCTUC/D
001~016 RCTUE/F
LED
09
08
07
06
05
04
03
02
01
Program *80 – Call Forward Station Ring Assignment
LED buttons = ringing assignment in
which calls should Call Forward
Processor CO Line Range
001~048 B1CU 001~032
001~144 B2CAU/BU 001~120
001~200 B3CAU/BU 001~120
B5CAU/BU 001~200
CO Lines
System & Station
3-179