Emergency Call Destination Assignment - Toshiba CTX100-S Programming Manual

400 Emergency Call Destination Assignment

Prerequisite Program:
This command assigns Emergency Call destinations to Emergency Call groups. There is one group for
each Day mode (Day1, Day2 and Night).
1. From the Program Menu, click
Attendant > Emergency Call. The
Emergency Call screen displays
(shown right).
2. Enter Program 400 data.
...or click one of the following
buttons:
• Insert – assigns the destination
for the selected index.
• Modify – assigns a new
destination to the selected
index.
• Remove – removes the
assigned destination from the
table.
3. Click Submit.
F
IELD
01 Day/Night Mode
02 Called Number Index
03 Emergency Call
Destination
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
None
D
ESCRIPTION
This is a display only field. It is controlled by the Strata CTX system.
Possible values: Day1, Day2, Night (default = no value)
This is a display only field. It is controlled by the Strata CTX system.
Possible values: 1~4 (default = no value)
Enter the destination DN for the emergency call.
Possible values: Up to 32 ASCII characters (default = no value)
400 Emergency Call Destination Assignment
Attendant
7-3