Changing The Date And Time - Talkswitch CT.TS005.003902 User Manual

f) Repeat Steps d and e until all required holidays are listed.
g) Select the mode to Use for Call Cascade settings. Choices are Mode 1
and Mode 2. This setting determines whether an incoming call will
use the extension's Mode 1 or Mode 2 call cascade during Holiday
Mode.

Changing the date and time

The Call Handling > Modes page shows the current date and time in the
TalkSwitch unit. You can change the date and time to match the computer.
1. Click Adjust.... The Adjust Date/Time window appears, and shows the
current date and time in the computer.
Alternatively, you can click the Adjust Date/Time link in the About
TalkSwitch page.
2. Set the Time in the computer.
3. Select the Date in the computer.
4. Select the Time Zone in the computer.
5. Select the Automatically adjust TalkSwitch clock for daylight saving
changes check box if your region uses Daylight Savings Time.
6. If required, enter a different NTP Server. The NTP Server provides the date
and time to the IP extensions.
7. Click Set. The date and time in the TalkSwitch unit is changed to match
the computer. You do not have to save the configuration for the change
to take effect.
T A L K S W I T C H U S E R G U I D E 9 7