Making Calls; Place Intercom Calls From A Local Extension To Another Extension; Place Intercom Calls From A Local Extension To A Talkswitch Phone; Place Out-Of-Office Calls From A Local Extension - Talkswitch CT.TS005.003902 User Manual

Making calls

Place intercom calls from a local extension to another extension

You can place an intercom call from a local extension to another local
extension, remote extension or ring group.
1. Pick up your extension's handset, and then dial the number of the
extension.
If the Intercom calls follow Cascade settings check box is selected in the
configuration, an intercom call will follow the call cascade of the dialed
extension. Otherwise the intercom call will ring continuously.
The dialedextension rings as follows:
• A local extension uses two short rings to identify the intercom call. IP
phones supported by TalkSwitch can identify intercom calls this way.
• A remote extension rings normally.
• A ring group uses the ring pattern selected in the configuration. The ring
group uses the same ring pattern for intercom calls and outside calls.

Place intercom calls from a local extension to a TalkSwitch phone

You can place an intercom call from a local extension to a TalkSwitch analog
phone (TS-80, TS-200, TS-400 or TS-600), or a TalkSwitch IP phone (TS-9112i,
TS-9133i or TS-480i). The dialedextension will activate its speakerphone.
1. Press 84 and then dial the local extension.

Place out-of-office calls from a local extension

1. Dial 9 or 81–88 to choose a line hunt group. The line hunt group gives
you access to an available line to dial out.
1. Dial the phone number.
2. Depending on your IP phone, press Dial, Send or
Your extension can be restricted to specific line hunt groups, and can block
certain outbound calls.
T A L K S W I T C H U S E R G U I D E
.
1 5 5