Installing The Talkswitch Configuration Software; Installing The Software - Talkswitch CT.TS005.003902 User Manual

INSTALLING THE TALKSWITCH CONFIGURATION
SOFTWARE

Installing the software

The latest version of the TalkSwitch software can be downloaded from
www.talkswitch.com/support.
1. If the TalkSwitch unit is connected with a USB cable, disconnect the
cable.
2. Turn on your computer and insert the TalkSwitch CD into your CD drive.
The install program starts automatically.
3. Click NEXT and follow the instructions.
If the TalkSwitch unit was connected with a USB cable:
1. Reconnect the cable. The Found new hardware icon will appear,
followed by the USB driver installation wizard.
2. Proceed with the USB driver installation by clicking Next.
3. Once the USB driver files have been installed, click Finished.
4. Once the USB driver installation is complete, start the TalkSwitch
configuration software.
5. When the Connection window appears, select USB, and then click
Connect. The Data LED on the TalkSwitch unit will blink when the
connection is successful.
If you prefer to use Windows Explorer or if the install process does not
launch automatically:
1. Double-click the My Computer icon.
2. Double-click the CD-ROM/DVD drive.
3. Double-click the Startscreen.exe icon and follow the instructions. After
you click the Finish button, you will see the TalkSwitch icon on your
desktop. This means that you have successfully installed the TalkSwitch
configuration software.
6 T A L K S W I T C H I NSTA LLATIO N