Without The Auto Attendant; Using An Analog Extension; Making Calls; Place Intercom Calls From A Local Extension To Another Extension - Talkswitch CT.TS005.003902 User Manual

TalkSwitch owners and employees can access other options at the auto
attendant:
• Call back or call bridge
• Retrieve voicemail
• Enter command mode to make system changes
All these features can be password-protected to avoid unauthorized access.
TalkSwitch also provides the option of ringing specific extensions or ring
groups prior to the engagement of an auto attendant.

Without the auto attendant

If you do not use the auto attendant to answer calls, please note that the
call cascade options for the local extensions are not engaged. For calls to go
to an extension's mailbox, the call must be transferred manually by someone
in the office. Once calls have been answered at a local extension, they can be
transferred to any extension or voice mailbox.

USING AN ANALOG EXTENSION

This section describes how to use a third party analog phone with the
TalkSwitch system. You can also use these procedures with the TalkSwitch
TS-80, TS-200, TS-400, and TS-600 phones. However these phones have
additional keys that make it easier to access the functions. Refer to the user
guide supplied with your TalkSwitch phone.

Making calls

Place intercom calls from a local extension to another extension

You can place an intercom call from a local extension to another local
extension, remote extension or ring group.
1. Pick up your extension's handset, and then dial the number of the
extension.
If the Intercom calls follow Cascade settings check box is selected in the
configuration, an intercom call will follow the call cascade of the dialed
extension. Otherwise the intercom call will ring continuously.
1 4 6 U S I N G T A L K S W I T C H