Talkswitch CT.TS005.003902 User Manual page 284

Connecting to TalkSwitch
D E
111 112
Connecting to TalkSwitch
rear panel
LAN E5 E6
MUSIC PA E1 E2
To office extensions,
phones and fax machines
RJ-11 cabling can go up to 100 feet from the TalkSwitch without affecting voice quality.
You may extend the lines farther although you may suffer voice quality.
Cabling can be run along baseboards, moldings, threaded between walls, and hidden under carpets.
Keep the cords in corners and along edges to help hide it, and avoid high traffic areas.
1. Use dual-line phone cable to connect from the demarcation point to
TalkSwitch. You will need to purchase the dual-line phone cable
(available at most hardware stores) or wire it and crimp it yourself. Do
not use the supplied RJ-11 cable as it is only a single-line cable.
2. Use the single-line RJ-11 phone cord supplied with TalkSwitch to
connect from the TalkSwitch extension to the extension block.
3. Connect the office phones to the TalkSwitch using RJ-11 cabling supplied
with TalkSwitch or the cables supplied with your phone.
LEGEND:
D
E
2 6 4
114 114
114
113
E7 E8 L3/L4 L4
PF
E3 E4 L1/L2 L2
Ext 113: To fax machine (optional) from jack E3
Ext 112: To phone from jack E2
Ext 111: To phone from jack E1
To extension block,
use a single-line phone
cable from jack E4
From demarcation point,
use a dual-line phone cable from
the demarcation point to jack L1/L2
USB SERIAL POWER
H O M E / O F F I C E W I R I N G G U I D E